Add actions

To trigger an action with a button, you have to assign the action in the properties menu. The following actions can be assigned:

Execute command:
When tapped, the selected button will transmit the assigned command of the selected device.

Execute macro:
When tapped, the selected button will execute the assigned macro.

Switch page:
When tapped, the selected button will navigate to the selected remote page.

Refresh page:
When tapped, the selected button will trigger a refresh of this remote page.

One page back:
If the button is pressed, the system switches to the last page opened.

One page forward:
If you assign the “Page forward” action to the button, the system switches to the next page in the page sequence.

Open pop-up:
If the button is pressed, the defined pop-up opens. You can also make all pop-up settings here.

Control Camera:
When tapped, the selected button will trigger a camera control command.

Send HTTP-request:
When tapped, the selected button will transmit the assigned HTTP-request.

trigger selection elements Use a normal button element to create a “make selection” button. Select “Trigger selection elements” as the action and then tick all the selection elements that you want to trigger with this button. Only the selection elements on this remote page are listed.

Show setup:
When tapped, the selected button will open the setup menu.

AIO REMOTE NEO (Desktop) Minimize window and switch full screen:
These functions are only possible with the AIO REMOTE Desktop. You can minimize the current window with the remote or switch to full screen at the push of a button.